Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Nissan / Nissan Altima / July 2004

Tip: Looking for answers? Try searching our database.

1995 Nissan Altima Stalling - Need help to diagnose

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
LinusV - 17 Jun 2004 15:09 GMT
Hello All

My 1995 Nissan Altima, might I add up this this point was in perfect
running condition. A month ago the car started stalling first when at a
stop, now the idle is very rough and the engine cuts off when accelerating
from a stop. This always happens when I first strat and drive the car for
the day, thereafter the problem is not so obvious.

My mechanic had a look at the car and suggested spraying carb cleaner into
the throttle body, this helped for about a month. I sprayed the carb
cleaner and then the car was running smoothly for 5 days. Then the problem
will come back, at a stop the car will start to idle rough then switch
off, then sometimes it will idle ok, but when I start to accelerate it
will cut off. So I started using fuel cleaner and replaced the plugs and
checked spark plug wires and distributor cap. No problems with any of
these. Checked the hoses no problems. Eventually took this car into the
Nissan dealer to have it diagnosed.

They suggest that the spark plug wires, plugs and the valve cover be
changed. Also that the 4 motor mounts be changed(non-related)...

I am trying to understand why the carb cleaner works and if the dealer
suggestion is valid or if there could be a deeper problem.

Any help will be appreciated.

Linus
MegAltima - 03 Jul 2004 22:15 GMT
I would guess that the problem is a fuel metering problem caused. The
engine is getting all the air it needs when you push the accelerator, but
the computer is not matching the air with fuel and then the engine dies.
The computer uses about 14 sensors to measure the fuel delivery
requirements, but for air measurement there are only 2 or 3. The least
like is the Air Temperature Sensor. The other two are the Mass Airflow
sensor (MAF), and the Manifold Absolute Pressure sensor (MAP). The carb
cleaner acts like fuel, but it's potentially cleaning the MAF sensor.
Also, although unlikely, the Air Filter or it's passage could be blocked.

The idea that spark plugs (and the spark altogether) could be the problem
is not entirely out of the question. If there is more trouble with
accelerating on a very humid or "moist" day then the spark plug wires are
probably arcing off. (Moisture causes this in older wires).

Hope that helps.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.