Hi,
I have a 99 Maxima and sometimes the car take a few tries to start. Does
this sound like an ignition coil about to go? I have 90k and have changed
two of the coils about 2 years ago. I recently changed the air filter and
did the plugs at 65k. Any advice would be appreciated.
Nirav J. Modi - 19 May 2004 16:08 GMT
Here are some coils on Ebay... you may want to cross-reference the
part numbers with your dealer to be sure they will fit:
"http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2478725169&ca
tegory=33689&sspagename=WDVW"
Also check with courtesyparts.com - they have very good pricing on OEM
parts.
Another website that sells OEM parts at a discount is
1stnissanparts.com - they have coils for a 2000 Maxima for around 50
bucks/piece.
HTH,
Nirav
96 Max GLE, 106k
houseslave - 20 May 2004 01:30 GMT
What a great deal. Too bad that they are for 2000 and above.
Thanks for the heads up.
> Hi,
>
> I have a 99 Maxima and sometimes the car take a few tries to start. Does
> this sound like an ignition coil about to go? I have 90k and have changed
> two of the coils about 2 years ago. I recently changed the air filter and
> did the plugs at 65k. Any advice would be appreciated.
PathfinderHero - 20 May 2004 22:45 GMT
Did you think to check the water level in the battery? Also check the
charge and hook it up to a trickle charger using the 2amp setting. If you
still have the original battery then it could be time for a new one. Take
it to a garage for a test. They'll tell you what shape it's in.
2cents - 06 Jun 2004 04:54 GMT
Don't know if this is your problem but our 95 was slow starting until it
warmed up. Turned out that the ignition switch sends a 'start' signal to
the computer just before the switch engages the starter. The switch was
worn and the 'start' signal was delayed. Guess this signal must tell the
computer to alter fuel during start procedure.
2cents - 06 Jun 2004 04:59 GMT
Our slow starting problem turned out to be the ignition switch was worn on
our 95 maxima. The ignition switch on the 95 sends a 'start' signal to
the computer 'just before' the starter is engaged. This signal was
delayed/missing and the engine would not start very well if the engine was
cold.