96 Maxima OEM Remote Programming

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

jweb@swbell.net - 04 Dec 2005 22:58 GMT

I just wanted to do one simple thing...make the horn beep when locking
with the remote. Can anyone tell me how to do this? Thanks

Reply to this Message

E Meyer - 05 Dec 2005 15:00 GMT

On 12/4/05 4:58 PM, in article
1133737082.208981.313670@g14g2000cwa.googlegroups.com, "jweb@swbell.net"

> I just wanted to do one simple thing...make the horn beep when locking
> with the remote. Can anyone tell me how to do this? Thanks

'96 OEM system won't do it. It just flashes the parking lights when you
lock it.

Reply to this Message

njmodi - 05 Dec 2005 16:06 GMT

www.vqpower.com has a writeup that shows you how to had a chirp/buzzer
that sounds when you arm/disarm the alarm. (It's not the horn, but I'm
assuming you just want some audible indication).

Cheers,
Nirav
96 Max GLE, 126k

Reply to this Message

JW - 05 Dec 2005 18:33 GMT

Thanks guys, I suspected this might be the case. Guess I'll just wire in a
relay from the light to a horn or some other sounding device.

>I just wanted to do one simple thing...make the horn beep when locking
> with the remote. Can anyone tell me how to do this? Thanks

Reply to this Message

JW - 20 Dec 2005 17:41 GMT

I doubt anyone is following this but, my previous message won't work. It
would cause the sounding device to work whenever the light is activated, as
in turn signals. Guess I'll have to tie into the alarm module. Just in
case someone wanted to try it...

> Thanks guys, I suspected this might be the case. Guess I'll just wire in
> a relay from the light to a horn or some other sounding device.
>>I just wanted to do one simple thing...make the horn beep when locking
>> with the remote. Can anyone tell me how to do this? Thanks

Reply to this Message