92 Maxima SE does not have a keyless entry in the US. (I had one for 10
years)
It has an alarm,
you can unlock all does with a key (turn twice)
it has direct ignition (6 coils, one on each spark plug)
but no touchpad (GXE had it)
If you have a GXE, there is a master code on a sticker behind the glovebox
area I think...
Gary K
> My son just purchased a 92 SE and we don't have the code for the
> keyless entry. Is there anyway you know of to set a new code that he
[quoted text clipped - 3 lines]
>
> Reproman
>My son just purchased a 92 SE and we don't have the code for the
>keyless entry. Is there anyway you know of to set a new code that he
[quoted text clipped - 3 lines]
>
>Reproman
My Maxima has the keyless Digital Touch Entry System, but I don't know
the code. How do I set it and operate it?
Ok first get a flashlight and, if your back is stiff, someone more
flexible. Open the front passenger door and slide the seat back. Get
on your back and with the flash light, look up under the dash, toward
your left (this would be on the door's side of the dash). You should
see a brass colored box with a wire harness and wires attached to it.
You might see a label that says "Digital Touch Entry Control Unit" or
something like that. You should also see two or three lines of code on
the label. One of the lines should begin with the letter "S". Record
the last 7 NUMBERS on that line, that's the master key number (well it
should be).
Now, wiggle out of the car and shut the door. Press the button labeled
"C"/"ST", where "C" is on the top and "ST" is on the bottom. Now enter
the seven digit master key and you should hear a constant tone sound,
during this period, enter a 5 to 7 digit entry key, this cannot match
the master key. There also cannot be three digits in a row that use
the same button, I.E. 909xxx or something like that. After you've
entered the code, wait for the tone to stop, press "LCK"/"9|0" to lock
the doors (HAVE A KEY READY JUST IN CASE YOUR CODE DOESN'T WORK
STUPID!). Now press "C"/"ST" and enter your new code, the doors should
unlock, if the doors do not unlock, press the "WDW"/"5|6" key and see
if your front windows roll down. If they don't, the code operation
didn't work, give me an email or something. If it did, then your door
lock timer is fried and you need a new one. You might want to email me
on that one too!
This not my work, I saved it some time back.
Al Moodie.
NissTech - 13 Sep 2006 22:26 GMT
Do as Al describes and you are good to go
> >My son just purchased a 92 SE and we don't have the code for the
> >keyless entry. Is there anyway you know of to set a new code that he
[quoted text clipped - 36 lines]
>
> Al Moodie.