 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Nissan / Nissan Z Cars / April 2004Injectors on 300 ZX
Can anyone advise me on the correct method of removing old injectors from the injector rail and whether the plastic top and plastic nip on injector is critical to the operation of the injector? This is for a 1990 ZX N/A. Thanks > Can anyone advise me on the correct method of removing old injectors from > the injector rail and whether the plastic top and plastic nip on injector is > critical to the operation of the injector? This is for a 1990 ZX N/A. > > Thanks Depends if you want the injectors to survive or not. The best way is to remove the plenum and press them out. Otherwise you can use the "dremel" method. Look on www.twinturbo.net in the tech section for a guide to replacing injectors. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.