240Z turn signal

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Jay hidy - 15 Mar 2005 00:14 GMT

Suddenly the right rear turn signal on my 72 240Z mostly stopped
working. The front TS is OK. RR Brake light and emergency flasher
all work. The 2-pin flasher doesn't click loudly when the right TS
is on like it does with the left.

Any ideas appreciated. Jay

Reply to this Message

Steve T - 15 Mar 2005 02:24 GMT

> Suddenly the right rear turn signal on my 72 240Z mostly stopped
> working. The front TS is OK. RR Brake light and emergency flasher
> all work. The 2-pin flasher doesn't click loudly when the right TS
> is on like it does with the left.

Just a guess but could be related to the emergency flasher switch.
Everything goes through it. Also seen lots of problems with the turn signal
switch and internal corrosion but that should affect both front and rear.
Never seen this problem.

Signature

Steve

http://www.atlantaracing.com

Reply to this Message

Jay H - 24 Aug 2005 04:18 GMT

First, thanks Steve for your suggestion. It turns out that the turn
signals for front and rear are routed separately from the turn signal
switch. It has to do with separating the brake and turn circuits. I
didn't see this until I made a copy of the wiring diagram that I could
highlight on.

I can guess that a new switch will be expensive, so I will try to
clean the contacts.

Jay

>> Suddenly the right rear turn signal on my 72 240Z mostly stopped
>> working. The front TS is OK. RR Brake light and emergency flasher
[quoted text clipped - 5 lines]
>switch and internal corrosion but that should affect both front and rear.
>Never seen this problem.

Reply to this Message