Idle Problem 350Z

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Jon Smith - 22 Oct 2004 07:58 GMT

Group,
I have an idle problem in my 2003 350Z. The idle goes up and down a few
hundred RPMs. The car runs fine but has the idle problem. It feels
like the ignition is cutting out at idle. I remember there was a
Technical Service Bulletin on the cam position sensor on the early 03
350Z carb. But, mine does not fall within the serial numbers that it
applies to. Also, the MIL light it not on so it just idles badly but
runs great. Any suggestions...

Reply to this Message

Steve T - 23 Oct 2004 04:12 GMT

> Group,
> I have an idle problem in my 2003 350Z. The idle goes up and down a few
[quoted text clipped - 4 lines]
> applies to. Also, the MIL light it not on so it just idles badly but
> runs great.

Did you check for codes? There are sensors that set codes but don't set a
CEL.

Signature

Steve

http://www.atlantaracing.com

Reply to this Message

John Smith - 23 Oct 2004 05:23 GMT

Dealer uploaded a later version of the computer software and the car
runs great.

> Group,
> I have an idle problem in my 2003 350Z. The idle goes up and down a few
[quoted text clipped - 4 lines]
> applies to. Also, the MIL light it not on so it just idles badly but
> runs great. Any suggestions...

Reply to this Message

Jason - 26 Oct 2004 16:52 GMT

> Dealer uploaded a later version of the computer software and the car
> runs great.
[quoted text clipped - 7 lines]
>> it applies to. Also, the MIL light it not on so it just idles badly
>> but runs great. Any suggestions...

Oh I want new software!!

Reply to this Message