Broken Tach, Need replacement

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

manjo - 16 Jan 2005 18:49 GMT

My tach needle just sits at 8000 rpm. On long drives, it starts to change
values, but the displayed values are not correct.

I'm getting about 20 mpg on the highway. I don't think the tach is passing
incorrect info to the ECC (indicated by wiring diagram), but I'm not sure.

I suspect the tach display mechanism is the only thing broken. Other than
Nissan, is there anywhere online where I can buy a new tach for my 1995
Quest?

Thanks,

Manjo

Reply to this Message

john smith - 16 Jan 2005 21:10 GMT

If you are in the Dallas area there is the Speedometer Specialty shop
but other than that I would go with a used one from a wrecking yard. I
could only imagine what a new one costs...

> My tach needle just sits at 8000 rpm. On long drives, it starts to change
> values, but the displayed values are not correct.
[quoted text clipped - 9 lines]
>
> Manjo

Reply to this Message

manjo - 17 Jan 2005 02:39 GMT

John,

I'm not near DFW area, but I will check with local wrecking yards. I
suspect the cost for a new one would be over the top.

Thanks,

Manjo

> If you are in the Dallas area there is the Speedometer Specialty shop
> but other than that I would go with a used one from a wrecking yard. I
[quoted text clipped - 13 lines]
> >
> > Manjo

Reply to this Message

john smith - 17 Jan 2005 06:34 GMT

It worked for me on my Stanza that the daughter drives...

> John,
>
[quoted text clipped - 33 lines]
>>>
>>>Manjo

Reply to this Message