1997 nissian truck 2.4 lit codes

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

campbell - 10 Mar 2005 22:10 GMT

on this 1887 nissian truck 4.2 lit 2 codes come up po110x2 intake air
temp. circuit malf. and po340 camshaft positon sensor A-bank 1 Circuit
malf. Before i start throwing parts at it how do i know its not an
internal thing. I don?t see anything out of the ordinary and i need it
fixed to pass emmisions. Any help would hbe appreciated. thanks

Reply to this Message

Lumbrjack - 28 Mar 2005 17:12 GMT

For the po1110 check the wires on your temp sensor. I was messing with my
air cleaner box on my 97 hardbody and one of the wires broke. You can try
to solder them, but I had to replace the entire temp sensor. The cheapest
I found was around 50 bucks.

Reply to this Message

larry - 29 Mar 2005 03:07 GMT

If that is the intake temp sensor. Check the wires and the wire harness
connection. I replaced my sensor (cost $80.00) that didn't fix the problem.
It was the connector. Later I found there was a recall on that connector.

> For the po1110 check the wires on your temp sensor. I was messing with my
> air cleaner box on my 97 hardbody and one of the wires broke. You can try
> to solder them, but I had to replace the entire temp sensor. The cheapest
> I found was around 50 bucks.

Reply to this Message