 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Nissan / Nissan Cars / September 200594' Pathfinder 5spd..how easy to remove the starter & solenoid ??
I see it's under the oil filter on the passenger side. Phil give it a shot, you'll have a great time. BTW , your best bet is to replace the whole unit with a factory OEM part, unless you want to do it all over again in a few weeks/months > I see it's under the oil filter on the passenger side. > > Phil Are you saying get the part from the dealer vs. a PepBoys, AutoZone or StraussAuto ? Phil yup, buy one from the dealer or yul have problems in the future, when i replaced mine, i had to hoist the engine up a bit to get clearance to remove the starter on my 94 pathfinder, its surely not a fun job > Are you saying get the part from the dealer vs. a PepBoys, AutoZone or > StraussAuto ? > > Phil > yup, buy one from the dealer or yul have problems in the future, when i > replaced mine, i had to hoist the engine up a bit to get clearance to remove [quoted text clipped - 4 lines] >> >>Phil Hi Shawn, Thanks for the heads up> I'll ramp the truck and look before buying the starter..I'll let you know how I make out. Phil mine was an auto trans though, hopefully you have enough clearance to work to remove yours > Are you saying get the part from the dealer vs. a PepBoys, AutoZone or > StraussAuto ? > > Phil I had great plans of doing it myself on my 94 Pathy (4x4 Auto). I bought a Nissan starter/soleniod, and read up on various techniques for getting the old starter out (Haynes manual, various forums, etc). Well, I climbed under the truck stared it down and tried to get at if for like 20 minutes and said "screw this". I'm sure that with my lack of experience, best case senario would have been all day. More likely I'd end up with a stranded truck with no starter. Brought it to a local garage and they installed it for $75. Best $75 I ever spent. > I had great plans of doing it myself on my 94 Pathy (4x4 Auto). I bought a > Nissan starter/soleniod, and read up on various techniques for getting the [quoted text clipped - 7 lines] > Brought it to a local garage and they installed it for $75. Best $75 I > ever spent. That is what I'm afraid of based on your description. Possibly the 5spd tranny allows for easier removal Thanks in advance. Phil 95 4x4 5 spd: remove the skid plate, remove starter bolts and pull towards the front. I had to twist it a lot but it basically came right out the front. The first time took me a couple of hours, now I can do it in 15 minutes. >I see it's under the oil filter on the passenger side. > > Phil |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.