 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Nissan / Nissan Cars / September 20052002 Sentra ser Heater Blower Resistor Block Location?
My 4 position switch for my heater/ A/C blower only works on the 4th speed. 1 thru 3 do not work. I was told the resistor block needs to be replaced. 1. Where is it located? 2. Will I have to replace the blower also, due to maybe the resistor block is located inside the blower? 3. Is this an easy job?, or will I have to take apart part of my dash board to get to the blower area? In other words what are the steps I should take to repair this problem. Thanks in advance for any help. Ed. > My 4 position switch for my heater/ A/C blower only works on the 4th > speed. 1 thru 3 do not work. I was told the resistor block needs to be [quoted text clipped - 6 lines] > In other words what are the steps I should take to repair this > problem. If it's the same setup as was in my 94 Altima, you can swap out the part with a new one in about 2 minutes . Look under the glove compartment at the ducting around the blower motor and you'll find an electrical connector plugged into something with a screw on either side of it. Unplug the connector, take out the screws, and you should be able to pull the resistor pack out. It's a flat panel with some traces on it for the different fan speeds. It's a relatively inexpensive part, I think I paid $50 CDN for mine from the dealer. Hope that answers your question :) >> My 4 position switch for my heater/ A/C blower only works on the 4th >> speed. 1 thru 3 do not work. I was told the resistor block needs to be [quoted text clipped - 22 lines] > > Hope that answers your question :) And from what I've read in this group before, there is a good chance you will only need to resolder the joints. Cheers Paul. > And from what I've read in this group before, there is a good chance you > will only need to resolder the joints. > Cheers > Paul. Hm, I'll have to try and remember that in case (when) the resistors go in my 99! |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.