Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Nissan / Nissan Cars / March 2006

Tip: Looking for answers? Try searching our database.

To cure a squeaky gas pedal just spray a WD-40

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Robert Cohen - 04 Mar 2006 14:17 GMT
Minor, routine kind of thing, but since i got this n.g. to annoy with
nit-shite question:

WD-40
is what I plan (when I remember), and I presume no damage is/could be
done by such(?)

Because the time I don't ask, I'll maybe do
something wrong

Tell me reason(s) the Frontier gas pedal sometimes squeaks (?)

Sympton of what?
JimV - 04 Mar 2006 14:25 GMT
> Minor, routine kind of thing, but since i got this n.g. to annoy with
> nit-shite question:
[quoted text clipped - 9 lines]
>
> Sympton of what?

It won't last long. WD40 is not really a lubricant (WD=water
dispersant). You might want to try white lithium grease.
willshak - 04 Mar 2006 14:44 GMT
> Minor, routine kind of thing, but since i got this n.g. to annoy with
> nit-shite question:
[quoted text clipped - 9 lines]
>
> Sympton of what?

Wet/snowy shoes.

Signature

Bill
In Hamptonburgh, NY

Steve T - 05 Mar 2006 04:16 GMT
> Minor, routine kind of thing, but since i got this n.g. to annoy with
> nit-shite question:
>
> WD-40

WD-40 isn't a lubricant.
Signature


Steve

http://www.atlantaracing.com

NoNoBadDog! - 06 Mar 2006 00:28 GMT
> Minor, routine kind of thing, but since i got this n.g. to annoy with
> nit-shite question:
[quoted text clipped - 9 lines]
>
> Sympton of what?

WD-40 is *NOT* a lubricant.  WD stands for Water Dispersant;  It is used to
displace water.  In the short tem, it has very *SLIGHT* lubrication-like
properties, but it is neither a lubricant nor is it long-term.  You
accomplished nothing but a very temporary masking of your problem.  In
addition, if you have any rubber or synthetic bushings or harnesses in the
area, the WD-40 will most likely damage them.

Bobby
Robert Cohen - 06 Mar 2006 14:14 GMT
Bobby says:

WD-40 is *NOT* a lubricant.  WD stands for Water Dispersant;  It is
used to
displace water.  In the short tem, it has very *SLIGHT*
lubrication-like
properties, but it is neither a lubricant nor is it long-term.  You
accomplished nothing but a very temporary masking of your problem.  In
addition, if you have any rubber or synthetic bushings or harnesses in
the
area, the WD-40 will most likely damage them

Robert replies:

Well, I didn't know that ("water-dispersant").

So, I'll  find some 3 in 1 oil or ... vaseline or SAE 10W--30 or
transmission oil or whatever.

However: WD-40 and duct tape  are semi-panaceas/cure-alls not to be
totally diminished.

That gas pedal squeaks--sorta like a mouse or a cat--because it got
very, or only a little wet (?). Is there another layman/easy way to
tell howwwww wet it got?
willshak - 06 Mar 2006 14:32 GMT
>  
>> Minor, routine kind of thing, but since i got this n.g. to annoy with
[quoted text clipped - 21 lines]
>
> Bobby

WD40 was/is recommended for spraying on rubber/plastic spark plug wires,
inside distributors, electrical connections, etc. to disperse water.
That was the main purpose of the original WD40. Where else would it be
needed to disperse water?

Signature

Bill
In Hamptonburgh, NY

NoNoBadDog! - 06 Mar 2006 21:04 GMT
>>> Minor, routine kind of thing, but since i got this n.g. to annoy with
>>> nit-shite question:
[quoted text clipped - 23 lines]
> was the main purpose of the original WD40. Where else would it be needed
> to disperse water?

In principle, you are correct.  However, in practice, I have had WD-40 cause
the rubber/synthetic rubber/plastic to get brittle, to craze, and to crack.
For distributors, it works fine, as the plastic there is a little more
robust.  On plug wires, it is good as a quick fix, but I would replace the
wiring as soon as possible after using it.  We wont even go into what it
will do to phenolic resin circuit boards....

Bobby
Steve T - 08 Mar 2006 04:47 GMT


> In principle, you are correct.  However, in practice, I have had WD-40
> cause the rubber/synthetic rubber/plastic to get brittle, to craze, and to
[quoted text clipped - 3 lines]
> wiring as soon as possible after using it.  We wont even go into what it
> will do to phenolic resin circuit boards....

What I love is reading people using on their car door hinges It's solvents
wash out any grease that is in them and a few days later you end up with
dry hinges that quickly wear out!
Signature


Steve

http://www.atlantaracing.com

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.