Valve cover baffle blowby 84 plsar

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

brian hayes - 10 Jun 2006 17:08 GMT

so i am getting way too much oil in my pcv system, pulled the valve cover
and checked the baffle, seems intact but since it is just screen, it is
allowing too much oil to come out. looking for ideas on stopping this
problem, i've got a puddle of oil in front of the air intake as well as in
my pcv lines. when i clean out system car runs fine, otherwise it runs very
bad

Reply to this Message

Codifus - 11 Jun 2006 02:15 GMT

> so i am getting way too much oil in my pcv system, pulled the valve cover
> and checked the baffle, seems intact but since it is just screen, it is
> allowing too much oil to come out. looking for ideas on stopping this
> problem, i've got a puddle of oil in front of the air intake as well as in
> my pcv lines. when i clean out system car runs fine, otherwise it runs very
> bad

Last time I saw this it was because the car had way too much oil,
period. The car took 4 quarts of oil but somehow had been filled with 7.
If that's the case with you, change your oil, make sure not to overfill,
and replace your PCV.

CD

Reply to this Message

Steve T - 11 Jun 2006 04:18 GMT

Get a new PCV valve and make sure the vac passage in the intake manifold is
clear.

Signature

Steve

http://www.atlantaracing.com

Reply to this Message

brian hayes - 11 Jun 2006 16:31 GMT

i have the right amount of oil and have already replaced the valve. how do i
clean out the vac passage? it would make sense that it is plugged with oil

>> so i am getting way too much oil in my pcv system, pulled the valve
>> cover
[quoted text clipped - 8 lines]
> is
> clear.

Reply to this Message