Hi,

I had a quick question on disconnecting a automatic seat belt warning
buzzer on my 94 Sentra. My seat belt indicator (and the annoying
buzzer) would go off for no reason while driving in a city (must be the
turns and the bumps..). I don't think it is due to any mistake with the
belts themselves or the sensors but a loose or faulty wire/switch.

Since I didn't want to run around with a multimeter and pull on every
connection under the seat, I thought I'll just bypass the indicator by
pulling out one of the connectors under my seats. There are two white
connectors under each seat. I found that when I disconnected one of
them (the larger one) the seat belt sign would come on when I started
the car and go off after blinking 3 or 4 times (and it never came on
while driving). During the entire process there was no annoying buzzing
sound.

Now my question. Does anybody know if there'll be any other side
effects to my disabling the seat belt warning system in this manner? If
the wire is not connected to any other system in the car, this seems
like a perfect solution to the entire seat belt problem.

There have been a lot of questions on this indicator problem on this
group. This could be one solution.

Thanks.
Thiaga