On 10/9/06 11:16 AM, in article 17tki21h2fguonl9n296cedviqbs9jp426@4ax.com,
>>> I have heard that the shape of the threads on the NGK plugs they use in
>>> these cars has pretty much eliminated the problem of plugs seized in the
[quoted text clipped - 26 lines]
> them out *much* easier. If nothing else a future owner or a shop
> technician will thank you for it. ;-)
My personal experience with three recent Nissans:
- '96 I30 at 85k miles - original NGKs still in there, everything was
pristine, plugs spun out by hand, threads were perfect. The engine
compartment in this thing looked like it had been abandoned in the woods for
a month with the hood open.
- '97 I30t at 63k miles - same thing. Everything clean and shiny.
- '95 Altima at 90k miles - car was pretty trashed. Plugs were fine. No
corrosion in the holes or on the threads.
- '91 240sx - only 75k miles, but car was 12 years old when I got it.
Appeared to be original NGKs. Plugs were definitely used up (this car did
not have platinum plugs). No issues whatever with the threads.
I have memories of finding Champion plugs binding in the head with rusted
threads in old Fords, 20 years ago, but I have seen no evidence in my
limited experience with Nissans and Hondas that it is a problem with the OEM
plugs.
So far, the score here is one seized Dodge and some "better safe than sorry"
advice. I'll ask the question another way:
- Nisstech, if you're still out there, do the techs at the Nissan garage
feel the need to use anti-seize on the plugs in newer Nissans or change them
early? Have you seen any OEM NGK plugs seized?
jesse - 10 Oct 2006 20:14 GMT
> On 10/9/06 11:16 AM, in article
> 17tki21h2fguonl9n296cedviqbs9jp426@4ax.com,
[quoted text clipped - 63 lines]
> them
> early? Have you seen any OEM NGK plugs seized?
On any aluminum engine head, the engine should be cold. There is a much
greater chance of stripping the threads if thay are warm. The same go's for
all aluminum threads.