1987 pathfinder 4 wheel drive

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

marykosciolek@gmail.com - 15 Jan 2007 22:38 GMT

i recently purchased a 1987 pathfinder. i'm not sure how to engage the
4 wheel drive and i don't want to mess it up. when i move the 4 wheel
drive control stick it seems to have on 2 positions: up or down.
however, there are 4 settings on the knob. anybody know how to do this?

Reply to this Message

Steve Parker - 15 Jan 2007 23:09 GMT

> i recently purchased a 1987 pathfinder. i'm not sure how to engage the
> 4 wheel drive and i don't want to mess it up. when i move the 4 wheel
> drive control stick it seems to have on 2 positions: up or down.
> however, there are 4 settings on the knob. anybody know how to do this?

Mary,
Pull it back one notch and you have 4 wheel high. 2 notches get you
neutral. Push down and pull back one more get 4 wheel low. Warning!
Only shift in and out of 4 wheel low when stopped and in neutral!
This info is based on my 1992 Pathy. It should be the same.
Sparky

Reply to this Message

DS - 16 Jan 2007 18:33 GMT

You also have to push the shifter down in order to shift into neutral. So:
2Hi
4Hi
push down
Neutral
push down
4Lo

>> i recently purchased a 1987 pathfinder. i'm not sure how to engage the
>> 4 wheel drive and i don't want to mess it up. when i move the 4 wheel
[quoted text clipped - 7 lines]
> This info is based on my 1992 Pathy. It should be the same.
> Sparky

Reply to this Message