My window will not roll up on 1999 nissan quest. The only response I
get is a faint, brief sound when i push the button downwards. I am
wanting to open up the door panel to get to the mecanism to manually
roll it up. I am stuck because I dont know how to get the trim around
the handle off. I dont want to just pull because I might break it. Any
help would be great.
on 6/5/2007 8:35 PM gameglitz@gmail.com said the following:
> My window will not roll up on 1999 nissan quest. The only response I
> get is a faint, brief sound when i push the button downwards. I am
[quoted text clipped - 4 lines]
>
>
There is a special tool to remove the C-clip that holds the crank handle
to the shaft. I have removed these clips without the tool, but requires
a little dexterity with a screwdriver and a pair of needle nose pliers.
If you push the door panel in at the handle to provide a gap between the
handle and panel you will see the clip.
See here for the tool:
http://cgi.ebay.com/Auto-Door-Handle-Clip-Remover-Installer-CalVan-37_W0QQitemZ4
454898945QQcmdZViewItem
See here for the tool and window crank:
http://www.crutchfield.com/S-F1E3FkoSjA3/cgi-bin/ProdView.asp?i=18187615
See here for a method of removal without the tool:
http://www.carstereohelp.com/stereoremovalWindowCrankR.htm

Signature
Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @
Redigoogle - 07 Jun 2007 15:45 GMT
> See here for the tool:http://cgi.ebay.com/Auto-Door-Handle-Clip-Remover-Installer-CalVan-37...
> See here for the tool and window crank:http://www.crutchfield.com/S-F1E3FkoSjA3/cgi-bin/ProdView.asp?i=18187615
> See here for a method of removal without the tool:http://www.carstereohelp.com/stereoremovalWindowCrankR.htm
Excellent.
Thanks for the question.
Thanks for the leads and links.
I was about to post a nearly identical question.
CR