Adding central locking to:-

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

justsid - 23 Jul 2004 20:03 GMT

Sunny Hatchback 1.4 LS 5Dr Auto 1991 reg. No central locking.

Just bought this old car and I am already tired of checking each door
separately before locking

I spotted a CL kit on EBay and have taken the plunge and ordered it. It is
coming from Hong Kong (hopefully, one day).

I suspect that the installation instructions will be minimal.

Anyone know of a site ( PDF format ?) where I can get some tuition on this
work.?

Also the boot/trunk is only operable with the key but I guess that a remote
release for that is a project for another day.

just sid

Reply to this Message

iruka_hoshi - 27 Jul 2004 19:55 GMT

I you already have power locks... it's an easy job... if you need to do a
conversion it might be a bit if. I got a set myself and ended up having toi
by factory power locks. The acutator would fit in my Nissan NX (100NX). I
believe DEI sells a power trunk release option, they go for about 20-30 USD
on ebay

> Sunny Hatchback 1.4 LS 5Dr Auto 1991 reg. No central locking.
>
[quoted text clipped - 13 lines]
>
> just sid

Reply to this Message

justsid - 27 Jul 2004 20:17 GMT

Thanks for info.

justsid

> I you already have power locks... it's an easy job... if you need to
> do a conversion it might be a bit if. I got a set myself and ended
[quoted text clipped - 19 lines]
>>
>> just sid

Reply to this Message

iruka_hoshi - 28 Jul 2004 19:49 GMT

Er.. man I can't type sometimes. I meant the aftermarket actuators couldn't
fit in my Nissan NX1600/100NX. Therefor I had to use factory style power
locks instead. I do believe there is enough room in the Sunni though. FYI:
It might be handy to have some extra drill bits handy. I broke a few bits
drilling screw holes.

I you run in to any queries, just post. I check the newsgroups often
myself.

> Thanks for info.
>
[quoted text clipped - 23 lines]
> >>
> >> just sid

Reply to this Message