yes its a factory installed system, mines a 94 pathfinder, exactly the same
as yours. underneath the driver seat is a small black box which is the alarm
system, if its going off easily due to the "vibration/impact" detection then
check the rear side if the box where a very small 3 position switch is
located, flip the switch all the way to the left, which is the least
sensitive setting, if you want to totally disable the "vibration/impact"
part of your alarm then just disconnect the 2-wire pig tail connector at
comming out of the box, to totally disable the alarm alltogether, disconnect
any and all wires coming from the alarm box. hopew this helps.
> > Any ideas on how to disable it (or fix it)? She bought the car new and
> > the system was already installed , so it's either factory or a dealer
[quoted text clipped - 4 lines]
> the thing was so sensitive that a medium-loud motorcycle could easily
> set it off. I left that feature turned off for years.
chisel - 18 Oct 2004 11:01 GMT
>yes its a factory installed system, mines a 94 pathfinder, exactly the same
>as yours. underneath the driver seat is a small black box which is the alarm
[quoted text clipped - 5 lines]
>comming out of the box, to totally disable the alarm alltogether, disconnect
>any and all wires coming from the alarm box. hopew this helps.
I'll be seeing my sister and her Pathfinder this weekend, so I'll see
what I can find.
Thanks!