Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Nissan / Nissan Cars / November 2004

Tip: Looking for answers? Try searching our database.

Spark plug wires popping off after tune up.

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Perry Templeton - 27 Nov 2004 16:11 GMT
I just changed plugs, wires, cap and rotor on my 98 Fontier.  Not dealer
items.  Purchased at local auto parts store.  Used the Bosch plugs.
Runs waaaay better now.
Around town, no problems.  My husband took the truck out of town, and he
calls and says the spark plug wires are popping up and won't stay seated.
The plugs came with a "sleeve" and I didn't really pay attention to them.
I called the dealer and he said to always use the NGK plugs.
I will probably replace them when the DH gets home, but in the meantime, I'm
curious, what's the deal with the Bosch plugs?
Perry
John Smith - 27 Nov 2004 21:35 GMT
Bosch plugs suck.  Anything associated with Bosch electrical suck to
inslude plug wires.  My 350Z is in the shop now because Nissan chose to
source some of their injectors from Bosch.  Buy NGK and you will be good
to go...  Just my two cents.

> I just changed plugs, wires, cap and rotor on my 98 Fontier.  Not dealer
> items.  Purchased at local auto parts store.  Used the Bosch plugs.
[quoted text clipped - 6 lines]
> curious, what's the deal with the Bosch plugs?
> Perry
Steve T - 28 Nov 2004 01:35 GMT
> I just changed plugs, wires, cap and rotor on my 98 Fontier.  Not dealer
> items.  Purchased at local auto parts store.  Used the Bosch plugs.
> Runs waaaay better now.

For today, if you used bosch platinums keep a tow truck's number handy! :-)

> Around town, no problems.  My husband took the truck out of town, and he
> calls and says the spark plug wires are popping up and won't stay seated.
> The plugs came with a "sleeve" and I didn't really pay attention to them.
> I called the dealer and he said to always use the NGK plugs.

They are TRYING to help if you'll listen, most people seem to believe they
know better than the people who made the vehicle about what parts to use.

> I will probably replace them when the DH gets home, but in the meantime,
> I'm curious, what's the deal with the Bosch plugs?

Probably has something to do with the -CHEAPO- wire set, cap and rotor that
was installed as well.

Signature


Steve

http://www.atlantaracing.com

Perry Templeton - 28 Nov 2004 02:02 GMT
Hi, Steve.
I didn't and don't ever buy the cheapest as a rule.
Not Nissan parts, but not the bottom of the barrel at the parts store.
I'm sure that lots of folks shop just for price, but not me.
I did some more research today, and the different tip is taller, that could
make a difference in reach of wire.  Also, the counter guy said that
sometimes the plug wires are packed with enough grease, that they make a
"bubble" and won't seat all the way.
I had read some decent reviews about the Bosch plugs, but after this
experience, I'm done.
Perry

>> I just changed plugs, wires, cap and rotor on my 98 Fontier.  Not dealer
>> items.  Purchased at local auto parts store.  Used the Bosch plugs.
[quoted text clipped - 17 lines]
> that
> was installed as well.
doS - 28 Nov 2004 02:06 GMT
I just installed NGK, I noticed a pleasant performace boost...

> Hi, Steve.
> I didn't and don't ever buy the cheapest as a rule.
[quoted text clipped - 35 lines]
> >
> > http://www.atlantaracing.com
Steve T - 28 Nov 2004 02:49 GMT
> Hi, Steve.
> I didn't and don't ever buy the cheapest as a rule.
> Not Nissan parts...

Why not? The quality is ALWAYS better and given what these vehicles cost,
why use poor quality parts that don't work? People will pay $35,000 for a
truck and then bitch about $100 for a set of good plug wires for it?  I
don't get it. I mean this is something that at most needs replacing every
5-10 years, there probably was nothing wrong with the ones you threw away..
Signature


Steve

http://www.atlantaracing.com

jjjsan - 28 Nov 2004 03:58 GMT
Sleeve could be miss align and allowing connector to seat correctly on
plug.
Stick with NGK or ND plugs, thats what Nissan recommends.
Plug wires, use OEM or NGK.
Cap & Rotor use OEM
Order parts from Mail order sites for discount prices.
I've used Brown & Brown Nissan and Courtesy Nissan.
Jim
Perry Templeton - 29 Nov 2004 19:42 GMT
Just purchased new plugs from Nissan dealer.  Hope that does the trick, will
compare heights.
Perry

> Sleeve could be miss align and allowing connector to seat correctly on
> plug.
[quoted text clipped - 4 lines]
> I've used Brown & Brown Nissan and Courtesy Nissan.
> Jim
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.