I would suspect a bad blower motor switch. If you can pull the module out
and get into it look for dirty contacts or wiper tracer. Also look to see if
there is any evidence of arcing (dark burns spots on tracer or wiper burnt).
If you cant adjust or clean, you may have to replace it.
Hope this helps.
Dave
> does anyone know where the fuse or relay is for this car there is 5
> relays on firewall ( motor side) which are not labeled when the motor
> stopped working when i moved the speed selector switch back and forth
> rapidly it restarted a few times but now nothing. I pulled the blower
> motor out and took it apart and cleaned the armature and magnets . when i
> hook motor up to 12 volt source it works
BOSS2222 - 05 Aug 2006 08:31 GMT
thank you d reid it turned out to be a relay