I've had a random problem with my Peugeot 306 since not long after I bought
it.
Stalling when engaging the clutch, this can even happen at highish speeds.
i.e. 40MPH slowing down, deciding what gear, clutch engaged, the battery
warning indicator flickers, then when in to gear all continues as normal.
The car totally stalls and I have to restart the engine when I've come to a
stop and it cuts out.
It's had:-
New coil pack, new Idle Control valve (which seemed to be exactly what the
problem could lie with), new battery, ecu check (tested as ok)...
Can't think of anything else, but with all this done - the problem has
continued. TOTALLY random too, it hasn't gotten any worse, or any better in
two years. It can go a week without 'stalling', or it can happen twice in
one journey. ODD indeed.
Can any Peugeot geniuses shed any light on this problem?
Thanks. Merry Christmas to all.
Nik&Andy - 21 Dec 2004 08:40 GMT
This problem occurred on early astra mk 3's I think, it was solved by an ecu
upgrade, it could be a sensor problem, such as the camshaft sensor or
something..... this would explain why it cuts out when slowing down, I
presume you are not accelerating at the time of the stall?
I am no more help than that though, sorry
Andy
> I've had a random problem with my Peugeot 306 since not long after I
> bought it.
[quoted text clipped - 19 lines]
>
> Thanks. Merry Christmas to all.
G.T - 31 Dec 2004 16:18 GMT
Hi,
> This problem occurred on early astra mk 3's I think, it was solved by an ecu
> upgrade, it could be a sensor problem, such as the camshaft sensor or
> something..... this would explain why it cuts out when slowing down, I
> presume you are not accelerating at the time of the stall?
Yeah, I remember of an ECU firmware update for 1.4s, which was said to
correct a bad acceleration problem (kind of power lost under hard
acceleration, IIRC). Perhaps you should check if your cas has been updated,
your Pug dealer should know.
HTH,
G.T
g.t6@worldonline.fr
205 Diesel & turbo-Diesel : http://205d.fr.st