Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / February 2005

Tip: Looking for answers? Try searching our database.

406 dashboard lamp question

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Peter - 13 Feb 2005 18:39 GMT
Hi,

The RHS bulb on my dashboard (the one that illuminates the fuel guage
and the rhs of the speedo) has failed

Any suggest how difficut it is to replace? I would like to change all
the lamps when the dash is apart.

Signature

Cheers

Peter

Remove the INVALID to reply

Aat van den Bos - 13 Feb 2005 19:29 GMT
It is very easy to remove just some screws and some plastic hooks.
The trick is to now where these hooks are lokated any Peugeot garage can
show you.
With a screwdriver you can lift them up and pull the dash out with the
airvents. thats all....

greetz Aat

> Hi,
>
[quoted text clipped - 3 lines]
> Any suggest how difficut it is to replace? I would like to change all
> the lamps when the dash is apart.
Peter - 14 Feb 2005 00:01 GMT
Thanks

>It is very easy to remove just some screws and some plastic hooks.
>The trick is to now where these hooks are lokated any Peugeot garage can
[quoted text clipped - 11 lines]
>> Any suggest how difficut it is to replace? I would like to change all
>> the lamps when the dash is apart.

Signature

Cheers

Peter

Remove the INVALID to reply

RyanO - 18 Feb 2005 07:39 GMT
I found that if you remove the cover at the bottom of the dash, then by
breaking your arm in two places, it is possible to replace the bulbs in
place, without stripping the dash. You just need to do it by feel. On mine
there were a few open holes where bulbs could be fitted, presumably for
other models, so just make sure which hole you took the globe out of.
I was too too lazy to strip the dash. Some cheap clip on the fascia
somehow always manages to break off.
You need to buy the whole globe and holder from the stealership, they
cleverly made it one piece.

Ryan
Nigel - 19 Feb 2005 19:45 GMT
>I found that if you remove the cover at the bottom of the dash, then by
>breaking your arm in two places, it is possible to replace the bulbs in
[quoted text clipped - 7 lines]
>
>Ryan
Don't blame the stealership. Blame Valeo!
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.