Phase 2 306 Plips

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Andy Kirkland - 18 Feb 2005 07:23 GMT

Hi,

I have just picked up a spare plip for my 306 off eBay since the car
only had one. I've managed to reprogram it OK, but then the old plip
doesn't work :(

Am I correct in thinking that the car can only "remember" one plip code
and that to have 2 sets of keys you have to have 2 identical plips?

Not particualarly bothered since the spare set is a spare and would
reprogram the plip if I had to....

Thanks,

Andy

Reply to this Message

timo - 18 Feb 2005 18:27 GMT

> Hi,
>
[quoted text clipped - 11 lines]
>
> Andy

From what I remember you have to program both keys at the same time, the
second key should be done within 10 seconds after the first one.

Tim

Reply to this Message

Andy Kirkland - 21 Feb 2005 17:56 GMT

>> I have just picked up a spare plip for my 306 off eBay since the car
>> only had one. I've managed to reprogram it OK, but then the old plip
[quoted text clipped - 8 lines]
> From what I remember you have to program both keys at the same time, the
> second key should be done within 10 seconds after the first one.

Thanks for that - I should have RTFM!

There does seem to be a problem with the immobiliser recognising the new
key. It works initially and then "forgets" after a few hours.
Anyone else experienced this?

Andy

Reply to this Message

bigmac999 - 19 Feb 2005 01:26 GMT

> Hi,
>
[quoted text clipped - 16 lines]
>
> Andy

You should just be able to repeat the programming method for any
remaining keys, and they should program in.

Reply to this Message