Replacing 206 Radio

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Joe Soap - 26 Feb 2005 08:15 GMT

The radio in my 206GTI needs has died, and I want to use a non-Pug
replacement. Does anyone know of any problems doing this? Are the
connections and mountings atandard?

TIA for any info.

Signature

Joe Soap.
JUNK is stuff that you keep for 20 years,
then throw away a week before you need it.

Reply to this Message

Gazza - 26 Feb 2005 09:37 GMT

Hi,

Does anybody know of a forum (or 3!) for the 407 that is in English?

I've found http://peugeot.fanzone.info/, that has a section for the 407, but
not much posted as yet, there are also a couple of good Dutch and German
forums that seem to have a whole host of hints/tips & tricks, and problem
discussions, however my foreign languages are not what they should be, with
translations performed by bablefish and google, being somewhat amusing.

Thanks,

407 2.0 HDI SE + Lux

Reply to this Message

Marc - 26 Feb 2005 09:41 GMT

>Hi,
>
[quoted text clipped - 9 lines]
>
>407 2.0 HDI SE + Lux

I'm quite confident that if you post in english on the dutch forum you
wont get flamed,
do mention however that you are english native..

Grrz from holland

Marc

Reply to this Message

Nick - 26 Feb 2005 09:56 GMT

Try http://206gti.net/

If you scroll down there's a link on the right hand side which will probably
help!

Nick

> The radio in my 206GTI needs has died, and I want to use a non-Pug
> replacement. Does anyone know of any problems doing this? Are the
> connections and mountings atandard?
>
> TIA for any info.

Reply to this Message

Jim - 04 Mar 2005 15:15 GMT

What radio does your Pug have now? If is uses the ISO connector then just
plug and play. If u have the stalk controller on your steering wheel u may
lose its function. There are some wiring adaptors u can buy from shops that
allow u to use the controller again.

> The radio in my 206GTI needs has died, and I want to use a non-Pug
> replacement. Does anyone know of any problems doing this? Are the
> connections and mountings atandard?
>
> TIA for any info.

Reply to this Message

Joe Soap - 06 Mar 2005 23:41 GMT

In response to what Jim <nospam@killspam.com> posted in
news:d09u2r$fc61@imsp212.netvigator.com:

> What radio does your Pug have now? If is uses the ISO connector then
> just plug and play. If u have the stalk controller on your steering
> wheel u may lose its function. There are some wiring adaptors u can
> buy from shops that allow u to use the controller again.

It's an RD1, and my local Halfords has a Sony that they say has an adaptor
to make it work with the stalk.

We shall see...

Signature

Joe Soap.
JUNK is stuff that you keep for 20 years,
then throw away a week before you need it.

Reply to this Message