 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Peugeot Cars / May 2005draining air from 405
How many air draining points there are in Peugeot 405 cooling system ? I know there is one over the thermostat cap. Are there more ? Thanks. Marius Kaizerman wrote in message ... >How many air draining points there are in Peugeot 405 cooling system ? >I know there is one over the thermostat cap. Are there more ? > >Thanks. That is the only one I've found on my 1995 405 XU7 petrol. It can be swine to bleed but I just run it for a few days, checking levels daily and topping up as needed. After that it usually stabilises. HTH Bob Thanks. But if it takes a few days to stabilize, it means there's at least one more point. > That is the only one I've found on my 1995 405 XU7 petrol. > It can be swine to bleed but I just run it for a few days, checking [quoted text clipped - 4 lines] > > Bob Marius Kaizerman wrote in message ... >Thanks. >But if it takes a few days to stabilize, it means there's at least [quoted text clipped - 8 lines] >> >> Bob I think it possible means there is a high point that there should be a bleed point fitted not necessarily that there is one fitted there. I'm sure I have read about filling the radiator with a tall large capacity funnel temporarily sealed into the filler opening and running the engine upto temperature with this in place. I've never bothered to try it as my method has been OK for me. regards Bob |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.