306 wont start after battery disconnected

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

agrofobik - 13 May 2005 19:02 GMT

Changed starter motor on L reg 306 1.4 xr. When reconnected battery and
boxed up wont fire and appears no supply to fuel pump. any tips gratefully
accepted. Please help. !!!!!!!

Reply to this Message

Malc - 13 May 2005 19:21 GMT

> Changed starter motor on L reg 306 1.4 xr. When reconnected battery and
> boxed up wont fire and appears no supply to fuel pump. any tips gratefully
> accepted. Please help. !!!!!!!

Any fuses blown? Is there an immobiliser and does this have to be reset
after the battery is disconnected?

Signature

Malc

Reply to this Message

Jim Mason - 13 May 2005 19:22 GMT

In article <152a0089356ef5dfe80192ee9279b808
@localhost.talkaboutautos.com>, agrofobik@ntlworld.com says...

> Changed starter motor on L reg 306 1.4 xr. When reconnected battery and
> boxed up wont fire and appears no supply to fuel pump. any tips gratefully
> accepted. Please help. !!!!!!!

Does it have a factory fitted immobiliser?

Jim

Reply to this Message

agrofobik - 13 May 2005 22:36 GMT

yes it has factory immobiliser, how would you reset it if thats whats
needed.

Reply to this Message

Jim Mason - 14 May 2005 12:25 GMT

In article <ebd40fc78262814e79ef82e55a849786
@localhost.talkaboutautos.com>, agrofobik@ntlworld.com says...

> yes it has factory immobiliser, how would you reset it if thats whats
> needed.

Lift up the rear seat base. Put your hand under the back and up into the
rear seat in the centre. You will find two connectors in there.
Disconnect the two of them and reconnect them - if you have an alarm it
will `bleep` - try to restart again.

Jim

Reply to this Message

agrofobik - 14 May 2005 22:32 GMT

many thanks to those who helped. sorted problem, was plug at base of
injection relay ( mounted on rear of ecu ) was not fully home, must have
knocked it while fitting S.motor.

Reply to this Message