306 S1 heater matrix

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Dave English - 01 Jun 2005 06:41 GMT

This week end I need to replace the heater matrix on my son's 306.

I have done the same on my 405 S2 in the past, removing the glove box
and just loosening the console to get enough access.

I assume I am going to be able to do the same on the 306. Can anyone
has done it please confirm & pass on any tips.

TIA

Signature

Dave English

Reply to this Message

earl cole - 02 Jun 2005 19:25 GMT

> This week end I need to replace the heater matrix on my son's 306.
>
[quoted text clipped - 5 lines]
>
> TIA

You'll be lucky, on the 306 the whole of the dashboard needs to be removed
to gain access to the matrix. (on my L reg)
removing the dash is easy, getting all the wires connected on the refit is a
royal pain but doable. Took me 2 days,
half a day to remove and one and a half to replace. Good luck.

Earl

Reply to this Message

Dave English - 03 Jun 2005 09:30 GMT

>> This week end I need to replace the heater matrix on my son's 306.
>>
[quoted text clipped - 10 lines]
>You'll be lucky, on the 306 the whole of the dashboard needs to be removed
>to gain access to the matrix. (on my L reg)

Thanks

Yes, that is what I have since discovered.

>removing the dash is easy, getting all the wires connected on the refit is a
>royal pain but doable. Took me 2 days,
>half a day to remove and one and a half to replace.

Hmm, I had better start early then.

> Good luck.

Thanks

Signature

Dave English

Reply to this Message

MARK B - 05 Jun 2005 19:24 GMT

>> This week end I need to replace the heater matrix on my son's 306.
>>
[quoted text clipped - 9 lines]
>
>Earl

2 days ????? you can do 2 in that no problem at all!!(no offence! mate)

Reply to this Message