Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / December 2005

Tip: Looking for answers? Try searching our database.

Fog Lights 306 T/D

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Mark - 29 Dec 2005 20:29 GMT
I'm racking my brain trying to figure out how to replace a front bulb to
 a front fog light on my 306 T/D Meridian.

Can anyone advise me on how to get to the bulb.

Thanks very much :-)
Bob Minchin - 30 Dec 2005 18:46 GMT
Mark wrote in message ...
>I'm racking my brain trying to figure out how to replace a front bulb to
>  a front fog light on my 306 T/D Meridian.
>
>Can anyone advise me on how to get to the bulb.
>
>Thanks very much :-)

If they are like the ones on my 405, you need to take out some torx screws
from the front of the bumper, and then withdaw the whole lamp assembly. It
is not unusual to find the connector has corroded. The bulb normally has a
wire connected to it - H3 type.

hth

Bob
Mark - 30 Dec 2005 19:09 GMT
> Mark wrote in message ...
>
[quoted text clipped - 13 lines]
>
> Bob

Thanks very much for the reply Bob - will be trying to locate screws at
first light !!
Chris - 30 Dec 2005 19:15 GMT
>> Mark wrote in message ...
>>
[quoted text clipped - 19 lines]
> Thanks very much for the reply Bob - will be trying to locate screws at
> first light !!
Why wait till its light?? can always use a torch to see what you are doing.
from chris Addlestone Surrey
Peter - 30 Dec 2005 19:15 GMT
> I'm racking my brain trying to figure out how to replace a front bulb
>  to a front fog light on my 306 T/D Meridian.
>
> Can anyone advise me on how to get to the bulb.

I worked out on mine that you have to attack from behind and below, by
removing the horizontal weathershield between the corner of the bumper and
the main wheel arch shield.  It's held by three torx screws.  That's as far
as I got because I was beginning to solidify.  When the weather is a bit
warmer I'll have another go, this time raising the front end on stands to
give me better access.

It looks as though having removed the shield, you then remove the screws
(two?) retaining the light unit and withdraw it from the space behind the
bumper.  My failed lamp is the nearside. I might have to move the horn to
get the lamp out.

Peter
Mark - 30 Dec 2005 22:33 GMT
>>I'm racking my brain trying to figure out how to replace a front bulb
>> to a front fog light on my 306 T/D Meridian.
[quoted text clipped - 14 lines]
>
> Peter

Thanks Peter - sounds like intensive surgery tomorrow.
I kinda hope it doesn't rain again all day tomorrow !!
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.