206 central locking control unit

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

AndyB - 06 May 2006 11:25 GMT

All the locks bounce open when trying to lock the car, have shorted this
auto-unlock feature on a 306 before but cant find the unit on the 206. Any
help appreciated

Andy B

Reply to this Message

Slim - 06 May 2006 13:37 GMT

Auto unlock will normall happen if one of the doors (including boot)is
not properly shut.

Presuming that they are, then the fault is normally one of the locks
not telling the control unit it is shut.

On the Cit Xantia, it was normally due to a sticky push button on the
inside.

Might help !!!

Slim

Reply to this Message

AndyB - 07 May 2006 20:21 GMT

Thanks for the pointer

Decided to disconnect the drivers door loom, no joy, then as the boot lock is easier removed the back cover disconnected the boot locking motor and both doors worked with no problems. Cleaned and lubricated the lock with Vaseline as it has a lot of plastic bits reconnected and everything appears to work 48hrs later

Andy B

> Auto unlock will normall happen if one of the doors (including boot)is
> not properly shut.
[quoted text clipped - 8 lines]
>
> Slim

Reply to this Message