206 (2004) - ABS pump failed!!

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

jcarey - 16 May 2006 14:32 GMT

Having alot of problems with my peugeot 206 S (2004) it began with the
ABS light, brake light and STOP lights staying on while driving and
then a day later the car wouldnt start. So far we have found the ABS
pump is burned out and needs to be replaced but we cant find out why
the car still wont start - does anyone know is the ABS failing a
problem with peugeots, and would this cause the car to not start?

Appreciate any advice!!!!!

Thanks

Reply to this Message

G.T - 17 May 2006 10:44 GMT

Hi,

> then a day later the car wouldnt start. So far we have found the ABS
> pump is burned out and needs to be replaced but we cant find out why
> the car still wont start - does anyone know is the ABS failing a
> problem with peugeots, and would this cause the car to not start?

It may have involved a major fail on the engine management bus (remember the
2004 is fully-muxed, began with 2002 models, IIRC), puting the bus in error
and disabling it (from my tiny knowledge of such buses [CAN, here], it is
possible).
Try disconnecting the battery for a couple of hours, reconnect it and leave
the car in ignition (2nd position) for at least 10s before attempting to
start.
Might work. Unfortunately, I guess you will have to get the car checked
using the diag tool.

HTH,
G.T
205 Diesel & turbo-Diesel : www.205d.com

Reply to this Message

G.T - 26 May 2006 10:37 GMT

Hi,

Any feedback on this one ?

--
G.T
205 Diesel & turbo-Diesel : www.205d.com

Reply to this Message