P reg 306 D Turbo - Turbo Replacement

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

devonmark - 06 Jul 2006 19:32 GMT

Hi,

Does anyone know how easy it is to change a turbo on a P reg 306 D
Turbo?

Is it possible to take it from the bottom of the car or would I need to
remove the engine?

Any ideas about how long it might take?

Anyone know what a scrap/new one might cost?

Thanks a lot for your help in advance!

Mark

Reply to this Message

Chris - 06 Jul 2006 20:05 GMT

> Hi,
>
[quoted text clipped - 11 lines]
>
> Mark

Done one many years ago. and we did it from under the car and from the
top. it helps if there is two of you doing the job,remove time about 1
hr. ring a company called find a part or look it up on internet.
good luck from Chris Addlestone Surrey

Reply to this Message

devonmark - 09 Jul 2006 22:22 GMT

Thanks for your help. 1 hour, you must know what you're doing! I'm a
day in and having problemsI've found that I can't undo the bolts
holding the turbo to the exhaust manifold are rusted in place and are
refusing to budge. The turbo and exhaust manifold are too big to be
removed as one unit. Did you have problems with this? The scrap one
that I plan to replace is with has the same problem.

Thanks again

Mark

> > Hi,
> >
[quoted text clipped - 16 lines]
> hr. ring a company called find a part or look it up on internet.
> good luck from Chris Addlestone Surrey

Reply to this Message

Chris - 10 Jul 2006 19:56 GMT

> Thanks for your help. 1 hour, you must know what you're doing! I'm a
> day in and having problemsI've found that I can't undo the bolts
[quoted text clipped - 27 lines]
> > about 1 hr. ring a company called find a part or look it up on
> > internet. good luck from Chris Addlestone Surrey

No sorry we had no problem doing the job,

Reply to this Message