 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Peugeot Cars / August 2006please help
can someone tell me where the bleed points are on the cooling system of the peugeot 406 2.1 td 1996 please > can someone tell me where the bleed points are on the cooling system of the > peugeot 406 2.1 td 1996 please I don't have this particular engne but on my pug the bleed screw is on top of the thermostat housing. HTH Bob >> can someone tell me where the bleed points are on the cooling system of > the [quoted text clipped - 5 lines] > > Bob What about on the side of the rad?top no not one there,just fitted new rad and done the trick with the bottle to make another header tank and found one bleed valve on heater matrix hose,but cant find anymore,just worried i have got all the air out, no not one there,just fitted new rad and done the trick with the bottle to make another header tank and found one bleed valve on heater matrix hose,but cant find anymore,just worried i have got all the air out,what symtoms would i have if there was air in there still? > no not one there,just fitted new rad and done the trick with the bottle to > make another header tank and found one bleed valve on heater matrix > hose,but cant find anymore,just worried i have got all the air out,what > symtoms would i have if there was air in there still? Give it a good run say 4-5 miles that will get the air out .(take some water with you)BUT DO NOT REMOVE THE RAD CAP WHEN UNDER PRESURRE. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.