 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Peugeot Cars / November 2006406 in the morning when it's cold
My 2.0 Petrol starts up, runs for say 30 sec, then starts running on 3 (or maybe even 2?) cylinders closeley followed by the antipollution alarm bleeping frantically. The only way I've found to overcome this is to switch the car off and leave for 30min or so and try again. This only seems to happen when it's 5-10 deg C outside. (The fault indicator takes a few days to clear, but I think that's related to the number of on/off cycles for the engine) This has happened occasionally from new, the car is 5 years old now with 113,000 miles on the clock. Anyone any ideas or experiences? Thanks Nick I'm guessing here but I think the anit polution alarm is cause by the incorrect mixture. By the way you describe it it would seem that the car is over fueling. This could be a number of reasons. I would sugest you get a garage to read the fault codes and tell you if you have any obvious faults. Otherwise it may well be a lot of sensor changing before you find it. > My 2.0 Petrol starts up, runs for say 30 sec, then starts running on 3 (or > maybe even 2?) cylinders closeley followed by the antipollution alarm [quoted text clipped - 11 lines] > Thanks > Nick Hi, I had exactly same problem on my Pug 406 2.0 ST from december 2002. When cold 30-60 seconds after a cold start, the Engine illuminator or the Board computer issued a catalyator or an anti pollution error. The engine was swinging!!!. Sometimes the motor had to be turned off and on again to gain torque. ( I assumed it was running on less than 4 cyllinders) After 3 times at the garage, they concluded that the motor needed a repair of the lifters. They had seen it a few times before. They repareed it within warranty and the motor is now running perfectly. regards Allan > I'm guessing here but I think the anit polution alarm is cause by the > incorrect mixture. [quoted text clipped - 23 lines] >> Thanks >> Nick
|
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.