 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Peugeot Cars / November 2006406 Mk2 Window replecement
Following a recent break-in I've had to replace my front passenger window (2000 Mk2 model with electric windows). Whilst removing the glass and the seal going round the door, I came across a small white plastic part. It's about 40mm long x 6mm wide with what looks like a plastic rivet going thru' a hole in the back. As the replacement window goes up/down the window drops out of the door seal so I'm guessing it's some sort of guide. Any pointers as to where it goes and how to re-fit it? >Following a recent break-in I've had to replace my front passenger >window (2000 Mk2 model with electric windows). Whilst removing the [quoted text clipped - 4 lines] >some sort of guide. >Any pointers as to where it goes and how to re-fit it? This guide attaches to the rear of the window via the rivet (there's a hole in the glass) then pushes into the rear window guide. > This guide attaches to the rear of the window via the rivet (there's a > hole in the glass) then pushes into the rear window guide. Cheers nigel. I asked the breaker for a MK2 window and got one complete with the cresent moon-shaped bit in the hole. When I compared it to the driver's side which also had once in I assumed this piece was extra and not a different version of retainer. Removed the smaller piece of plastic and put in my larger channel runner - but not before I broke the damn thing trying to get the rivet out. Thank the gods for superglue ;) |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.