1999 406 instrument panel removal

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

PH13 - 07 Nov 2006 19:21 GMT

The bulb for the mileometer has failed. How easy is it to remove the
instrument panel to replace?

TIA

Reply to this Message

nigel - 07 Nov 2006 22:16 GMT

>The bulb for the mileometer has failed. How easy is it to remove the
>instrument panel to replace?
>
>TIA

Two Torx screws at the top above the instrument panel, then use a wide
flat spatula to unclip the rest of the cover. Then three screws hold
the instrument panel in--one at the top and two at the bottom.

Reply to this Message

PH13 - 09 Nov 2006 19:00 GMT

>>The bulb for the mileometer has failed. How easy is it to remove the
>>instrument panel to replace?
[quoted text clipped - 4 lines]
> flat spatula to unclip the rest of the cover. Then three screws hold
> the instrument panel in--one at the top and two at the bottom.

Thanks for the info. I'd done the torx screws but then lost nerve. I'll try
again

Reply to this Message