Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / November 2006

Tip: Looking for answers? Try searching our database.

Smokey Pug 106

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
wyn.w@tiscali.co.uk - 08 Nov 2006 18:49 GMT
Hi, I have a slight smoking problem with my 1998 Peugeot 106 diesel
1527cc. Every time I start-up, be it a cold or hot start, I have a
cloud of white smoke exiting from the exhaust like a bloody volcanic
eruption.
The engine has just had a complete top end rebuild with brand new
components, refurbished injectors & the valves have been digitally
re-seated, everything has been set & checked for tolerance.
The car has run fine until a couple of weeks ago when I started getting
the volcanic smoke cloud following me, the car has also lost a fair bit
of grunt.
Obviously I've checked & rechecked all the recent work to the engine,
glow plugs, compression test  & pump timing, even had the injectors
checked again for correct spray pattern.

Any ideas?
Brian - 09 Nov 2006 18:19 GMT
> Hi, I have a slight smoking problem with my 1998 Peugeot 106 diesel
> 1527cc. Every time I start-up, be it a cold or hot start, I have a
[quoted text clipped - 11 lines]
>
> Any ideas?

White smoke is unburnt fuel. Are you sure that the fuel pump timing is
correct, as retarded injection timing is normally the cause. It would also
cause loss of power. Remember that there are the bolts which hold the pump
sprocket onto the pump hub, which will allow the timing to alter if they are
not tight. The natural way for this to go would be retarded.
Unless of course it's steam, in which case you have a faulty head gasket.
But you would be losing coolant if this were the case. Actually in a diesel,
you normally get pressure building up in the rad rather than steam in the
exhaust, due to the very high compression.
Peter Chant - 09 Nov 2006 18:50 GMT
> But you would be losing coolant if this were the case. Actually in a
> diesel, you normally get pressure building up in the rad rather than steam
> in the exhaust, due to the very high compression.

Yes, the sight of the guy trying to use the 'sniffer' thing on the top of my
radiator but failing due to gas and hotwater erupting out of the rad.
filler would have been so much more amusing had my head gasket not
gone... :-/

Signature

http://www.petezilla.co.uk

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.