406 heater blower problem

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

LesG - 09 Jan 2007 20:25 GMT

Hi, I have a 406 exec turbo. About 14 months ago I had blower problems
and it cost almost £200 to fix. I now have heater blower problems
again.
My wife bless her stalled the car the other day and now the heater
blower is blowing on high constantly. We can increase the output to
max but it wont go down any further than just off max. I have had the
motor out and all conections appear good. I’m thinking that it could
be the heater blower control module. Could I be right? I am changing
my car soon and need to fix it asap.
All replies gratefully received.

Signature

Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/406-heater-blower-problem-Peugeot-ftopict202901.html

Reply to this Message

Nigel - 10 Jan 2007 20:01 GMT

>Hi, I have a 406 exec turbo. About 14 months ago I had blower problems
>and it cost almost £200 to fix. I now have heater blower problems
[quoted text clipped - 6 lines]
>my car soon and need to fix it asap.
>All replies gratefully received.

You are almost certainly correct. They are part of the blower motor on
the Mark One version but can be changed seperately. Part number is
644178 for Valeo or 644186 for Behr (make of the blower motor and the
heater assembly). For the Mark Two then it depends whether it has
aircon or not. 644178 for non aircon and if it has aircon it is not
available seperately. You need the motor.
If you post your VIN number, the last eight will do, I can confirm the
correct number for you.

Reply to this Message

LesG - 11 Jan 2007 18:25 GMT

Thanks for posting on this one Nigel. The control module comes off on
my motor and I am curently trying to source a cheap replacement.
Missed out on a few unfortunately but will keep hunting.
Thanks again
Les :

> On Tue, 09 Jan 2007 20:25:10 GMT, LesG <none@000.com> wrote:
>
[quoted text clipped - 29 lines]
> confirm the
> correct number for you.

Signature

Reply to this Message