 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Peugeot Cars / February 2007406 multi function lights/tappets
At the risk of sending old timers on the site round the twist again...Model: 406 Executive Estate DT 2088 CC Registered 12 January 1998. Multi Function Display just below central air vents----Bulbs or Leds??..and can the unit be eased out with the all purpose screwdriver safely to check? Top engine now knows its done 129K! Tappets -adjustable or not? Many thanks folks for your patience >At the risk of sending old timers on the site round the twist >again...Model: 406 Executive Estate DT 2088 CC Registered 12 January 1998. [quoted text clipped - 5 lines] > >Many thanks folks for your patience Definitely bulbs and the display eases out, yes. May be easier with the removal of the adjacent switch. It is the Mark 1 406?? Or is it the Mark 2 with no switches next to the display. In which case there are two blanks either side of the display which hook out, and you'll see 4 Torx 20 screws holding the display in. Either way it is bulbs. Just check that the bulbs come out of the holder. Sometimes they are integral with the holder and you need the complete thing. Part number is 611260 and you need 2 for the Mark 1 and 3 for the Mark 2. As for the tappets. If you mean the 2.1 diesel with 12 valves then they are hydraulic. The 1.9 has shims. >> At the risk of sending old timers on the site round the twist >> again...Model: 406 Executive Estate DT 2088 CC Registered 12 January [quoted text clipped - 13 lines] > integral with the holder and you need the complete thing. Part number > is 611260 and you need 2 for the Mark 1 and 3 for the Mark 2. And as a follow on, the ones that Halfords sell don't fit in my 1998 model. They look similar but project too far out at the back. Pug/Citroen ones are a tad more expensive but of course they do fit.  SignatureMalc You will pay for your sins. If you have already paid, please disregard this message. Not always the last bulbs I bought from Peugeot were the long ones that don't fit so be warned. Mike > >> At the risk of sending old timers on the site round the twist > >> again...Model: 406 Executive Estate DT 2088 CC Registered 12 January [quoted text clipped - 22 lines] > You will pay for your sins. If you have already paid, please disregard > this message. If you quote that part number they will fit. I have done them before and have had no problem. >Not always the last bulbs I bought from Peugeot were the long ones that >don't fit so be warned. [quoted text clipped - 26 lines] >> You will pay for your sins. If you have already paid, please disregard >> this message. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.