Squeking sound when changing gear

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Poul Dürr Pedersen - 27 Feb 2007 19:03 GMT

Hi NG,
I have a 306 2.0 HDI from year 2000. I happy about the fantastic car but
during the past couple of months a squeking sound is anoying me a bit. I
happens when I change gear from 2. or 4. gear. The sound seems to come from
just below the gear lever.

Anyone any idea what causing the sound? I recon it could be some
fitting/sleeve when translating the gear level movement from vertical to
horizontal underneath the bottom of the car.

Regards
Poul Dürr Pedersen

Reply to this Message

Chrs - 27 Feb 2007 19:40 GMT

Can you spray down the shaft? if so it might be a nylon bush drying
up.or a rubber bush, try and have a look under the shaft cover and
spray wd40 round it all..

Reply to this Message

moron - 05 Mar 2007 20:46 GMT

HI I had the same squeek as you ,but in a 2ltr 406and the problem was the
sealing ring on the exhaust manufold that holds the front pipe air
tight,it had been assembled dry,it should have been assembled using a bit
of high melting piont grease,when i did this it cured my problem squeek,i
hope this helps somebody

Reply to this Message

Poul Dürr Pedersen - 06 Mar 2007 07:51 GMT

Thanx for your help,
I think I can live with the sound another month and have a look at it when
the weather get a bit warmer. We have had a snow storm her in DK a week
ago...

Poul

Signature

Poul Dürr Pedersen
Yamaha Fazer FZS 600 S
-fjern de to X'er ved svar på mail

> HI I had the same squeek as you ,but in a 2ltr 406and the problem was the
> sealing ring on the exhaust manufold that holds the front pipe air
> tight,it had been assembled dry,it should have been assembled using a bit
> of high melting piont grease,when i did this it cured my problem squeek,i
> hope this helps somebody

Reply to this Message