Boxer Problem starting

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

IanMac - 03 Apr 2007 08:25 GMT

I have a 2.5 diesel boxer non HDi, when I try to start the engine, it
starts and cuts out, it has a new fuel filter, I have bleeded the fuel
through to the injectors, I have taken out the sender unit from the
tank the filter is clean no dirt showing, could this be the cut off
solenoid playing up if so can any tell how to remove it. the engine is
a DJ5 engine with a Bosch injector pump, also do’s any know what the
switch is on top of the pump its like a micro switch.

Signature

Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/Boxer-Problem-starting-Peugeot-ftopict210219.html

Reply to this Message

fairlyclueless - 05 Apr 2007 19:51 GMT

> I have a 2.5 diesel boxer non HDi, when I try to start the engine, it
> starts and cuts out, it has a new fuel filter, I have bleeded the fuel
[quoted text clipped - 8 lines]
> Articles individually verified to usenet standards. Visit URL to contact author/report abuse
> Thread archive:http://www.AutoBoardz.com/Boxer-Problem-starting-Peugeot-ftopict21021...

Hi,

I take it then this happened after you replaced the fuel filter ? I
may be off the mark, because I have an old 306 TD, but do you have the
hand primer on this car ? Last time I did my fuel filter, I primed it
- it started, ran a bit cut out, this happened several times - once it
ran for about 10 seconds and then died. In the end, I started it and
nipped back round the front and just kept working the primer while it
ran for a bit, and that sorted it.

Just saying could it be that you still just havent got all the air
out ?

Craig

Reply to this Message