Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / May 2007

Tip: Looking for answers? Try searching our database.

Nearside (left) CV gaiter/boot has a nick in it - Pug 306 1998 1.4 petrol

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
David Hearn - 30 Apr 2007 10:16 GMT
I've noticed that the nearside (left side when sitting in the car,
gearbox side so shorter driveshaft) CV gaiter/boot has got a small nick
in it.  It's pretty small, and isn't on  a 'crease' part of it but in
the middle of a flat face.  The surrounding inch or two had a little
grease (I assume) on it.  Pressing gently around the area causes a
little more great to come out - suggesting (maybe wrongly) that there's
still some in there and it's still pretty full.

I actually noticed the CV boot had some grease on it around Sept 06
(with MOT done at council place at end of Oct 06) but for whatever
reason, hadn't been able to get a good look until now.

Is there any kind of repair that can be done on it considering the
damage is not on a crack, but a low flexed flat face.  It looks like
external damage rather than normal wear and tear (which I'd expect to
happen on a crease point).

If not, what kind of cost should I expect for replacing that boot at a
local garage?

Alternatively, how difficult a job is it?  I know my Dad used to do it
on his Mini, but I've not really done many jobs like this but more than
willing to try!

Thanks

David
MrCheerful - 30 Apr 2007 11:11 GMT
> I've noticed that the nearside (left side when sitting in the car, gearbox
> side so shorter driveshaft) CV gaiter/boot has got a small nick in it.
[quoted text clipped - 23 lines]
>
> David

clean up and a dab of silicone
Tank - 30 Apr 2007 11:46 GMT
>> I've noticed that the nearside (left side when sitting in the car,
>> gearbox side so shorter driveshaft) CV gaiter/boot has got a small nick
[quoted text clipped - 25 lines]
>
> clean up and a dab of silicone

Thoroughly clean with meths or similar, roughen surface around hole with
fine sandpaper and you can use a thin piece of similar rubber (puncture
outfit patch etc) but use a good quality superglue instead of rubber
adhesive, works a treat. done it several times even on a crease and in one
case lasted as long as I had the car (2 years0. Gets through MOT as well
Paul Giverin - 30 Apr 2007 13:15 GMT
>> I've noticed that the nearside (left side when sitting in the car, gearbox
>> side so shorter driveshaft) CV gaiter/boot has got a small nick in it.
>> It's pretty small, and isn't on  a 'crease' part of it but in the middle
>> of a flat face.
>
>clean up and a dab of silicone

Absolutely! I managed to nick mine when cutting off the brake discs with
a hacksaw. I put on a blob of silicone and it lasted another 4 years
before it developed a proper split elsewhere in one of the folds.

Signature

Paul Giverin

British Jet Engine Website    http://www.britjet.co.uk

David Hearn - 01 May 2007 11:14 GMT
>> I've noticed that the nearside (left side when sitting in the car, gearbox
>> side so shorter driveshaft) CV gaiter/boot has got a small nick in it.
[quoted text clipped - 25 lines]
>
> clean up and a dab of silicone

By silicone you mean...?  Silicone sealant as used in kitchens and
bathrooms?  Just want to make sure I'm thinking the same thing as everyone.

Thanks for the advice everyone.

D
Paul Giverin - 01 May 2007 17:44 GMT
>By silicone you mean...?  Silicone sealant as used in kitchens and
>bathrooms?  Just want to make sure I'm thinking the same thing as
>everyone.

Yes that's it. Silicone sealant.

Signature

Paul Giverin

British Jet Engine Website    http://www.britjet.co.uk

Keith Willcocks - 01 May 2007 19:59 GMT
>>By silicone you mean...?  Silicone sealant as used in kitchens and
>>bathrooms?  Just want to make sure I'm thinking the same thing as
>>everyone.
>>
> Yes that's it. Silicone sealant.

Make sure it is "real" silicone, not the cheap substitute sold in some DIY
sheds.
Signature

Keith Willcocks
(If you can't laugh at life, it ain't worth living!)

Chrs - 30 Apr 2007 19:23 GMT
clean it up and use silicone on it but dont just go mad with silicone.
do it with care,and just silicone the hole.
chris addlestone surrey
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.