306 squealing

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Blobby - 27 Aug 2007 09:48 GMT

Hi,

My 1999 306 1.8 petrol has an intermittent loud squealing sound (sometimes
sounds as if there is an element of grinding as well), this has been
happening on and off for a couple of years. It can last for a day or a week
at a time and may not do it for a couple of weeks before it returns.

Sod's law states that every time it goes to the garage it never does it.
They have changed the belt, tensioner and pulley but it still returns.
Listening to it yesterday evening it would appear that it is coming from the
power steering pump, can anyone advise me if this is a likely source of the
noise, is it common and a rough guide to the cost of having it replaced at a
non main dealer garage.

The sound seems to be engine revs dependant to a degree and full steering
lock in either direction does produce a low level deep rumbling noise when
moving.

The noise is getting deeply embarrassing - you can hear me approaching long
before you see me!

Thanks for any assistance.

Reply to this Message

Chrs - 27 Aug 2007 17:33 GMT

What about checking your bottom crankshaft pulley.on my 405 it makes a
noise, but when it is warm it stops.

Reply to this Message

Blobby - 28 Aug 2007 19:08 GMT

> What about checking your bottom crankshaft pulley.on my 405 it makes a
> noise, but when it is warm it stops.

This noise is without doubt coming from the top of the engine. Phoned my
local garage today who say it will cost the best part of 300 pounds to
replace - sounds a bit over the top to me (£180 + vat for the pump alone).

Reply to this Message

mr - 20 Sep 2007 17:13 GMT

>> What about checking your bottom crankshaft pulley.on my 405 it makes a
>> noise, but when it is warm it stops.
>
> This noise is without doubt coming from the top of the engine. Phoned my
> local garage today who say it will cost the best part of 300 pounds to
> replace - sounds a bit over the top to me (£180 + vat for the pump alone).

I might be a mile off here, but my 606 diesel had a sqealing noise and it
was coming from the exhaust manifold between the head. I thought it was the
water pump/timing belt pully.

Reply to this Message

Brian - 29 Aug 2007 10:44 GMT

> Hi,
>
[quoted text clipped - 18 lines]
>
> Thanks for any assistance.

Get out your longest screwdriver, place the blade on the pump (when you can
hear the noise) and place handle firmly against your ear. This very high
tech stethascope will identify the source of the noise. Move the blade from
place to place until you confirm it.
If the pump is easy to get at, ie. at the top of the engine, then it is
really a simple job to do. Have a look at www.parts4peugeot.com (Neat Autos)
for the pump and see what cost an exchange unit would be. Euro Car Parts
also stock them, and you might have a branch closer, though Neat autos are
in West Drayton, very close to Heathrow. An excellent place for all your
Peugeot parts.

Reply to this Message