205 Rear Heated Screen Problem

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

True Jedi - 23 Nov 2003 15:16 GMT

Hi there, only about 4 bars are working at the moment, is there any way to
fix this myself?

Reply to this Message

G.T - 23 Nov 2003 16:06 GMT

Hello,

> Hi there, only about 4 bars are working at the moment, is there any way to
> fix this myself?

Three bars working on mine. I wait :-)

Regards,
G.T
g.t6@worldonline.fr
205 Diesel & turbo-Diesel : http://205d.fr.st

Reply to this Message

Uwe Giese - 23 Nov 2003 21:26 GMT

Easy done - Just fit another -is that called "reardoor"? - and then be
more careful with the back screen in future ;-)
I was told to use a kind of liqid silver, which was to be spread over
the damages in the heating threads. Bouht that - spent a fortune and it
never worked.

Best wishes
Uwe

G.T schrieb:

> Hello,
>
[quoted text clipped - 7 lines]
> g.t6@worldonline.fr
> 205 Diesel & turbo-Diesel : http://205d.fr.st

Reply to this Message

Some Jedi - 24 Nov 2003 09:41 GMT

> Easy done - Just fit another -is that called "reardoor"? - and then be
> more careful with the back screen in future ;-)
[quoted text clipped - 4 lines]
> Best wishes
> Uwe

Thanks Uwe, I was going to go down the paint route but will look in a new
panel

Reply to this Message

Some Jedi - 23 Nov 2003 21:50 GMT

G.T { g.t6@worldonline.fr } chucked this at usenet and hoped it would stick:

> Hello,
>
[quoted text clipped - 6 lines]
> g.t6@worldonline.fr
> 205 Diesel & turbo-Diesel : http://205d.fr.st

: )

Just read me haynes manual... looks like I need some conductive Paint.

Any ideas where I can get this cheapest any one?

Thanks

Reply to this Message

Fred - 26 Nov 2003 23:42 GMT

> G.T { g.t6@worldonline.fr } chucked this at usenet and hoped it would stick:
>
[quoted text clipped - 16 lines]
>
> Thanks

ELECOLIT 340 (conductive paint from Radio Shack)
Fred

Reply to this Message

Horny Devil - 30 Nov 2003 13:09 GMT

Use electro-cure, it's about £8 a bottle, hallfords sell it.

You just paint on a line where it's broken.

Ian

>Hi there, only about 4 bars are working at the moment, is there any way to
>fix this myself?

Reply to this Message