Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / January 2008

Tip: Looking for answers? Try searching our database.

307 feline rear lights

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Ben Hicks - 15 Jan 2008 23:07 GMT
Hi,

Does anyone know how to change the rear lights on a 307 Feline. It's the
unit that has the brake light in the middle with two semi circular side
lights surrounding it, looks like (0).

One of the two side lights on the left hand rear has gone and I couldn't
seem to find a way into the unit tonight. Admittedly I didn't try for too
long as it was dark and raining, so will attempt it again in daylight. I
didn't know if anyone had any hints though.

Cheers.

Ben
pastis - 16 Jan 2008 00:17 GMT
> Hi,
>
[quoted text clipped - 10 lines]
>
> Ben

They should be replace from inside the car, not outside. You must partly
remove the interior decoration.
I can't reproduce the pictures here, but this is what the manual says:

1. Direction indicators (P 21 W).
2. Reversing lights (P 21 W), left-hand side.
   Fog lamp (P 21 W), right-hand side.
3. Brake lights (P 21 W).
4. Side lights (x 2) (R 5 W).

These 6 bulbs are changed from inside the boot:
- Move aside the boot trim to access the bulb holder,
- Press the two tabs and remove the bulb holder,
- Change the faulty bulb.
When refitting, take care to pass the trim under the seal.

Grtz,
Eric B.
tricky4000 - 16 Jan 2008 22:32 GMT
> > Hi,
>
[quoted text clipped - 29 lines]
> Grtz,
> Eric B.

Always start by removing the rubber door seal and then fold back the
cardboard-like carpet trim.  It doesn't damage easily and you can move
it back quite far.
The two tabs on the lamp holders must be pushed gently away from each
other.  Unplug the combination wires by pressing the little plastic
tab on the bottom of the plug.  This way you can hold the lamp holder
with all it's bulbs in your hand.  When putting this back in, you
should hear a click when the two tabs engage.

Dan.
Ben Hicks - 18 Jan 2008 00:21 GMT
Thanks for your responses guys!

In daylight, it was much easier to see the upper clip so had the bulb
changed in no time.

Cheers,

Ben
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.