Hello,
My 52 plate 406 has developed a squeak!
When I first start the engine it sounds like a bird chirping under the
bonnet, this disappears once the engine has warmed up.
Closer examination suggests it's coming from the pulley of the unit
above the alternator (this is a 2002 406 2ltr 16v rapier petrol). Is
this the water pump?
If it is the water pump, is it an easy job to replace i.e. one I should
be able to do myself or is it a garage job?
Would adding a lubricant like this one
http://www.netparts.co.uk/store/index.php?main_page=product_info&cPath=18&produc
ts_id=29
be worth a try before dismantling?
Any suggestions gratefully received.
Thanks,
Richard
Bob Minchin - 30 Jun 2008 21:32 GMT
> Hello,
>
[quoted text clipped - 19 lines]
>
> Richard
When it is chirping, drip a little water onto the belt. Stand off to one
side of the belt track!! I expect it will stop squeaking. My 405 did
this and changing the belt fixed it.
NB I expect the the pulley you are talking about is the power steering
pump.
Bob
Chris - 01 Jul 2008 16:48 GMT
Sounds like my 405, it turned out to be my fan belt not tight, i have
not done it yet as i am just getting over a double hernia op. so it has
stopped me a little.but i will soon be back to 100% or more,lol
Keith W - 06 Jul 2008 14:09 GMT
> Sounds like my 405, it turned out to be my fan belt not tight, i have
> not done it yet as i am just getting over a double hernia op. so it has
> stopped me a little.but i will soon be back to 100% or more,lol
Don't tell me; the hernia was caused by pedalling too hard ;o)
(see Bystanders reply to your 405mpg post)

Signature
Keith W
Sunbury on Thames
(If you can't laugh at life, it ain't worth living)
Chris - 06 Jul 2008 19:33 GMT
Keith i wish i knew how i got double hernias, but if anybody on here
has got one get it done .its worth it .it might be painfull for 4-5 day
trying to walk but it is worth it.
Richard Setford - 06 Jul 2008 16:31 GMT
BUMP!
> Hello,
>
[quoted text clipped - 19 lines]
>
> Richard
Richard Setford - 07 Jul 2008 07:14 GMT
Chaps,
It would appear that something went wrong with my ISP's news server and
any suggestions you kindly made weren't picked up while that server was
off-line. Hence my bump message.
Would somebody please be good enough to cut and paste any posts that
were made? It would be much appreciated.
Thanks and regards,
Richard
> Hello,
>
[quoted text clipped - 19 lines]
>
> Richard
Keith W - 07 Jul 2008 18:00 GMT
> Chaps,
>
[quoted text clipped - 28 lines]
>>
>> Any suggestions gratefully received.
Here are the replies (I have excluded non topic ones).

Signature
Keith W
Sunbury on Thames
(If you can't laugh at life, it ain't worth living)
When it is chirping, drip a little water onto the belt. Stand off to one
side of the belt track!! I expect it will stop squeaking. My 405 did
this and changing the belt fixed it.
NB I expect the the pulley you are talking about is the power steering
pump.
Bob
Sounds like my 405, it turned out to be my fan belt not tight, i have
not done it yet as i am just getting over a double hernia op. so it has
stopped me a little.but i will soon be back to 100% or more,lol
Chris
Richard Setford - 15 Jul 2008 17:31 GMT
Thanks Keith, much appreciated
>> Chaps,
>>
[quoted text clipped - 30 lines]
>
> Here are the replies (I have excluded non topic ones).
Robijns - 30 Aug 2008 10:18 GMT
thanks for you regards
billy
> Thanks Keith, much appreciated
>
[quoted text clipped - 32 lines]
>>
>> Here are the replies (I have excluded non topic ones).