 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Pontiac / Pontiac Firebird / June 2006what TH350 do I use in my 87 firebird ?
I am taking the crap 70R4 out and was going to use a TH350 6" with shift kit and use the tailstock from the 700R4 and put it on the TH350 to hok up that dumb torque arm. Is this the right one I have to use (6") ? Anyone who has done this and could pass on the info.. would be great.. thanx I'm not sure if the tail housings will interchange, when I did this many years ago I used a B&M kit to connect the torque arm. I think the kit is no longer available. It was a steel bracket that bolted on the same bolts that hold on the tail housing and held the torque arm mount. Or get a rebuilt 700R4 from someone who knows what their doing and will put a guarantee on it. > I am taking the crap 70R4 out and was going to use a TH350 6" with shift >kit and use the tailstock from the 700R4 and put it on the TH350 to hok up >that dumb torque arm. Is this the right one I have to use (6") ? Anyone who >has done this and could pass on the info.. would be great.. thanx Thank You, Randy Remove 333 from email address to reply. it will interchange.. I have done it but I used a 9" truck tranny and it was too long causing the driv shaft to do damage. The adapter your taking about is still available.. I was just wondering if anyone has done it without the bracket and what size tail stock was on the TH350 > I'm not sure if the tail housings will interchange, when I did this > many years ago I used a B&M kit to connect the torque arm. I think [quoted text clipped - 15 lines] > > Remove 333 from email address to reply. I would rebuild the 700 R4 Gas is high I have a 69 camaro with 4:56 gears and a th350 trans it built strong but is awful on the highway. a good rebuilt 700r4 run about 2k > I am taking the crap 70R4 out and was going to use a TH350 6" with shift > kit and use the tailstock from the 700R4 and put it on the TH350 to hok up > that dumb torque arm. Is this the right one I have to use (6") ? Anyone who > has done this and could pass on the info.. would be great.. thanx I would rebuild the 700 R4 Gas is high I have a 69 camaro with 4:56 gears and a th350 trans it built strong but is awful on the highway. a good rebuilt 700r4 run about 2k > I am taking the crap 70R4 out and was going to use a TH350 6" with shift > kit and use the tailstock from the 700R4 and put it on the TH350 to hok up > that dumb torque arm. Is this the right one I have to use (6") ? Anyone who > has done this and could pass on the info.. would be great.. thanx |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.