 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Pontiac / Pontiac Cars / November 2005Front Wheel Bearing
How hard is it to change a front wheel bearing in a 2000 Pont. GTP?? >How hard is it to change a front wheel bearing in a 2000 Pont. GTP?? Assuming it is simmilar to the bearing on a TransSport, if you are lucky it is a relatively simple job - but if not it CAN be rather major. Had to have the strut off the van, and the 20 ton press would not move it. Ended up using the torch.(the "blue point puller") > How hard is it to change a front wheel bearing in a 2000 Pont. GTP?? Very easy. 30 minute job at most. No special tools needed. Unbolt the old one and bolt on a new one. You will need a 36 mm socket, possibly an impact gun to get the nut off, a torque wrench that is good to to 250. "« Paul »" <" =?x-user-defined?Q?=AB?= Paul =?x-user-defined?Q?=BB?="@houston.rr.com> wrote in message news:43699075.72B86A5D@houston.rr.com... >> How hard is it to change a front wheel bearing in a 2000 Pont. GTP?? > > Very easy. 30 minute job at most. No special tools needed. > Unbolt the old one and bolt on a new one. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.