 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Pontiac / Pontiac Cars / July 2007Pontaic aztek Blower Resistor
seems a common problem but my pontiac Aztek 01 has lost settings 1-3 o my blower fan I was told by many that it is a burnt out Blower resistor, this seem to be the issue. the settings burned out one by one. The question i how do i get to the assembly to replace it? can it be done by me o will i need to get a mechanic. Ive been told it is easy to replace bu I am unsure how to go about doing it. Thank -- jkporcupin Should be under the pass side hush panel in the bottom of the heater case several wires coming out of a stright inline connector. and yes this is a common problem. > seems a common problem but my pontiac Aztek 01 has lost settings 1-3 on > my blower fan. [quoted text clipped - 3 lines] > will i need to get a mechanic. Ive been told it is easy to replace but > I am unsure how to go about doing it. Thanks Also check the plug to make sure its not melted as well > seems a common problem but my pontiac Aztek 01 has lost settings 1-3 on > my blower fan. [quoted text clipped - 3 lines] > will i need to get a mechanic. Ive been told it is easy to replace but > I am unsure how to go about doing it. Thanks |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.