No. that's my dream, someday to move up to a 1995.
> Uh... You don't own a modern (1990's and up) car, do you?
> No. that's my dream, someday to move up to a 1995.
>
>> Uh... You don't own a modern (1990's and up) car, do you?
Cool!
My 1992 was somewhat easy get at the floor metal.
Removing the seats, console, computers, door step guards, side panels,
sound proofing, carpet, matting, etc. to get at the metal only took one full day.
But the 2006.... Don't think i will even try.
Erness Wild - 29 Mar 2009 00:00 GMT
Ah, well you would be doing it the hard way.
A carpet installer would cut the carpet in panels around the floor pan
on three sides and lift it up. Then repair the rust (holes) repaint
and voila, the carpet goes back down in the same place it was cut from
since one edge is still attached.
I have taken the whole carpet out once, because I wanted to make sure
about how much damage was occouring. (But then cut four panels later)
Good thing I did. Unlike Studebaker floorpans* (remember those?)
modern floor pans are not painted very well originally, and they have
no drain holes to let water out, because of letting fumes into the
car. However a small hole in the lowest part of the floor pan with
soundproofing and carpet, can't allow fumes into the car.
Anyway, when your seat brackets rip through the floor and you're
sitting on a lean to one side, you can't say you weren't warned.
* also sloped down from the tranny hump to the door sill, letting
water run out of the car.
>> No. that's my dream, someday to move up to a 1995.
>>
[quoted text clipped - 6 lines]
> full day.
> But the 2006.... Don't think i will even try.
anthonyzadeh@gmail.com - 30 Mar 2009 03:14 GMT
> Ah, well you would be doing it the hard way.
> A carpet installer would cut the carpet in panels around the floor pan
[quoted text clipped - 24 lines]
> > full day.
> > But the 2006.... Don't think i will even try
I have had multiple cars and never had an issue. I had a 1988 Toyota
Corolla that had more than 560XXX kms on it. I bought it used and have
never done this. The car worked great all the time I had it and the
guy i sold it to is still driving it with no problem. My Wife's car is
a 2000 Camry with almost 200XXX kms on it and never had a problem with
the floorboards. The car is dealer maintained for everything. Once a
year we bring the car to the dealer for an overall inspection and
never was it an issue. if your car does this, than maybe you should
watch how much water you bring into the car with you. The only time I
ever heard of this happening was on my fathers old '76 chev. Sierra,
and that was after 25 years. Hope your cut up carpets are doing well!
Erness Wild - 30 Mar 2009 15:05 GMT
> I have had multiple cars and never had an issue. I had a 1988 Toyota
> Corolla that had more than 560XXX kms on it. I bought it used and have
[quoted text clipped - 7 lines]
> ever heard of this happening was on my fathers old '76 chev. Sierra,
> and that was after 25 years. Hope your cut up carpets are doing well!
Hey, that's good to hear. My current car is 23 years young and I
repainted and repaired the floor twice now. I guess "my bunch" tracks
more snow and slush into the car than normal. I now have a good size
hole under the brake pedal. Easy fix now that I can just prop the
carpet up. My car before this one rusted out on rear passenger side.
The one I had before that was okay.
I get the transmission fluid and filtre done yearly and that guy
usually lets me know what happening underneath.
I watch the water, but snow and slush you can't do much about, even
with good floor mats.
The backside of the carpet in my Bonneville is rubber coated. I could
spill a gallon of water on it and it won't touch the floor pan.
Not a problem here, but thanks.
harryface
91 Bonneville 316,799
05 Park Avenue 81,868